FavorilerGiriş yap
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
  • Hans Christian 43
Geri
Devam et
  • 54 Görüntülenme

Ketch, Yelkenli yat

Hans Christian 43

Cutter/Ketch

Favorilere ekle

96.900 USD

yaklaşık 4.881.000 TL

KDV hariç


  • Uzunluk x Genişlik13,11 m x 4,24 m
  • Su çekimi1,83 m
  • Yapım yılı1978
  • MalzemeFiberglas (CTP)
  • İlan türüİkinci el tekne

  • ÜreticiHans Christian
  • Model43
  • Köprü altı geçiş yüksekliği17,16 m
  • Deplasman14.288 kg
  • Omurga tipiYan omurga
  • Dümen sistemiWheel steering
  • Kabin sayısı3 kabinler
  • Yatak sayısı7 yatak
  • Tuvalet1 tuvalet
  • Showers1 duş
  • TahrikŞaft tahriki D-Drive
  • MotorIsuzu C240
  • Motor gücü1 x 60 HP / 44 kW
  • Yakıt545 l Dizel
  • Motor saati2.600 h
  • Azami hız7 Knot
  • Ana yelkenTam çıtalı ana yelken
  • CenovaSarma camadan

Detaylı bilgi ister misiniz?

Hemen bilgi alSatıcıdan hemen bilgi al

Konum

Amerika Birleşik Devletleri » Tacoma, WA, USA. Shown by Appt!


Notlar

1978 Hans Christian 43, 96.900 USD

Bu, metnin orijinal dildeki halidir.
Üzgünüz, bu metin için otomatik çeviri özelliği mevcut değildir.
(en fazla 2100 karakter)

Bir saniye lütfen, metin çevriliyor.

Üzgünüz, metin otomatik olarak çevrilemedi.

This vessel's slip at a clean and secure marina in Tacoma, WA is transferrable with purchase.


Hans Christians were purpose built to handle long voyages, and provide comfortable living at sea for extended periods. At anchor she'll shrug off ground swells and allow occupants a peaceful respite.


Over the last 3 years, the current owner has invested well over $50k to refit and maintain the operational systems and mechanical components. During this time all through-hull fittings have been replaced, the hull was sanded and new barrier coat applied. Zincs were replaced where needed. There was no visible sign of osmosis.


Every element below decks is clean and odor free.


There are 3 private cabins 2 of which are double berthed.


The 2 aft cabins provide single berth to starboard and a double to port. There is storage in excess for either.


There is a large navigation station to starboard and forward of the companionway as you descend. The desk space is large and unencumbered. There is good access to the components, including radar, VHF, GPS. and chart plotter.


The galley is massive and the basin with work surface is centrally located to make food prep at sea a breeze. There are a massive toploading refrigerator and freezer. Food storage is abundant.


In the beamiest section below decks, you will find a cavernous saloon with a huge settee and table.


Moving forward of the saloon is the large head to port. It has a stand alone shower, space for more storage and a new macerating electric head. This space can be isolated from the saloon and the V berth by utilizing clever hatch and door system. The space starboard of the head is storage and shelves with fiddled edges.


Forward of this space is a very large V berth w/ queen quarter berth to port. There is also access to the anchor locker forward of V berth.


All access to engine, utilities and heaps of storage is below the settee and galley basin. The access panels are easily removed and allow very good access to most of the major operational systems.


The Isuzu motor has been recently serviced and has new glow plugs and heat exchanger. With the current hours and basic maintenance it will have a long service life.


Above decks, as you move around the exterior, the teak elements of this stately vessel appear structurally sound, however, she will need some sanding and considerable cosmetic revitalization. The hull-freeboard and overall foundation looks solid. The bowsprit has some paint delamination in areas.


The standing rigging appears sound although it does appear original and a rigging survey is advisable prior to heavy voyaging. The running rigging, blocks, winches and deck organizers appear serviceable but could use attention and cleaning.


With some elbow grease and vision it would not take much to get this beautiful girl back in shipshape.


This Hans Christian 43 is currently available for viewing by appointment and reasonable offers are being considered. She would make a great LLC opportunity for an air BNB, and also a great travelling home on the sea for a couple or small family with vision and ambition.


These boat details are subject to contract.

Note: Offers on the asking price may be considered.


Register with Boatshed to see 79 extra photos of this Hans Christian 43 Cutter/Ketch.


This Hans Christian 43 Cutter/Ketch has been personally photographed and viewed by Kevin Matjejovsky of Boatshed Port Townsend.

Currently installed navionics include:
Garmin 7 series Chartplotter at helm
Micrologic Mariner GPS Navigator
Furuno Model 1621 X-band Radar Display
Furuno LC90 Loran C Navigator
Furuno Radar Dome RSB-0060
Icom VHF M400 Series w/Mic Control

All Nav Systems are functional and show in very good condition. There are also newer, updated and a new Garmin navionics Suite with MFD chart plotter that have yet to be installed and will be included in the sale.
All sails are Quantum Tanbark incl. Headsail, Inner Foresail, Mainsail and Mizzen.

They are all in very good to excellent condition. The sails are all covered with custom canvas that appears like it's doing its job keeping the sails clear of UV.
Deck hardware is serviceable and functional but will need to be upgraded for future heavy use.

There are 2 primary pedestal mounted sheeting winches located Port and Starboard within the Cockpit. A halyard winch is mounted on the Mizzen Mast.

The Mainsaill Mast has a halyard winch mounted on mast and can also be used to raise both working headsails. There are 2 secondary sheeting winches located on coach deck on either side of the companionway. All winches appear to operate well and are in serviceable condition.

Anchor chain is 1/2" chain of unknown length. Rode is of unknown length.

There is a roller and brace for a stern anchor at the pushpit.
All chain is of galvanized 1/2" - 5/8". Lengths are not known by the current owner, however it appears to be in serviceable condition overall. Winches are operable and are well bedded.

The Anchor Windlass is a Heavy Lewmar with electric foot operated switches for up/down operation.

Various blocks and deck organizers may need replacement and/or servicing at buyers discretion.

There is currently no tender available with sale.
There is a manual Bosworth manual bilge pump located below the cockpit seating area.
2 Rule Electric Bilge pump forward and aft of engine compartment

Bu metin otomatik olarak çevrilmiştir.


Ekipman

  • AIS
  • Çapa
  • Akü
  • Akü şarj cihazı
  • Sintine pompası
  • Sıcak su sistemi
  • Baş demir ırgatı
  • cd player
  • Pusula
  • Derinlik ölçer
  • EPIRB
  • Dondurucu
  • Buzdolabı
  • GPS
  • Isıtma
  • Mikrodalga
  • Seyir fenerleri
  • Fırın
  • Harita plotteri
  • Radar
  • Radar reflektörü
  • Radyo
  • Kara elektriği bağlantısı
  • Evye
  • Sprey tentesi
  • Kıç demir ırgatı
  • TV
  • VHF telsiz
  • Sıcak su sistemi
  • Basınçlı su sistemi
  • Rüzgâr ölçer

Video

Bu içerik görüntülenemiyor.

Bu web sitesi için Marketing çerezini devre dışı bıraktınız.

Hizmetler


Boatshed Port Townsend satıcısının diğer ilanları

Boat24 ile başarılı bir şekilde satış yapın

Teknenizi satın