2009 Custom motorboat, 85.000 EUR

This custom motorboat measures 9.90 m in length with a 3.55 m beam and is certified for up to eight passengers. Its hull and interior are protected by a 1 mm West System epoxy resin coating, providing extensive coverage of the structure. VAT has not been paid.

Propulsion is provided by two inboard YANMAR 4LHA diesel engines with shaft drive, rated at 240 HP each. Both engines were installed new and have 430 operating hours per engine. The boat reaches approximately 25 knots and cruises at approximately 18 knots at 2,600 RPM for economical operation.

Onboard equipment includes a complete navigation and electronics system, fully fitted mechanical accessories and a 400W photovoltaic installation supporting the electrical system through solar charging. The vessel has been maintained mechanically and structurally, used for three to four months each summer and stored under cover in a private facility during the remainder of the year. A dedicated trailer can also be included for transport between storage and the shipyard.