2026 M.A.T. 11 na prodej

The M.A.T. 11 is a high-performance ORC Racer-Cruiser, designed primarily for handicap racing, with a focus on ORC Class C. An optional IRC package is available.

Optimized for coastal and inshore racing (windward/leeward courses) and capable of offshore passages up to 600 NM, the boat is also ocean-ready according to ISO Category A standards.

Designed to the upper limit of ORC Class C, the M.A.T. 11 is a dual-purpose yacht, offering both competitive performance and comfort for short cruises.

Designer: Matteo Polli Yacht Design


General
Construction
Standard ISO 12215: Hull Construction
White gelcoat on hull, deck, bulkheads and interior modules
Molded non-skid on deck
Optional non-skid soft cockpit cover grey
Hull, deck, bulkheads and all interior components in PVC foam cored composite VE glass
sandwich.
Vacuum assisted resin infusion.
Laminated assembly of all components to hull and deck.

Rudder and Steering
Composite rudder and carbon fiber rudder stock
Jefa self aligning high performance rudder bearings
Carbon fibre tiller
Optional 900 mm black composite twin wheels

Rigging
Sparcraft alloy performance mast with 2 sets of aft swept spreaders
Rod rigging
Alloy deep section racing boom with internal outhaul purchase
Alloy mechanical vang
LED navigation lights/anchor light on mast
1 main halyard sheave
1 Cl I height jib halyard sheave
1 wing spinnaker/jib halyard sheave to spectacle at I height
2 masthead spinnaker halyard sheaves
Optional Axxon Composites carbon fibre mast
Optional carbon fibre bow sprit
Optional symmetrical spinnaker equipment

Accommodations
Bulkheads and interior components in PVC foam cored composite glass sandwich
White gelcoat finishes on interior modules
White painted interior hull and deck surfaces
Custom SS T nuts for deck gear mounting
High density foam cushions

Central cabin:
Lightweight composite companionway ladder for easy access to engine
Composite bunks stb & port
Lightweight composite nonskid floorboards
Optional folding-away table in central cabin

Enclosed heads
Stainless steel hand basin
Jabsco marine manual toilet
Optional waste water tank

Galley
Twin burner gimballing gas oven
Stainless steel galley sink
GRP refrigerator compartment
Optional 12 volt cooling compressor for refrigerator compartment

Plumbing
Plastimo 150 l flexible freshwater tank
Jabsco pressurized freshwater pump
Jabsco manual bilge pump in cockpit 3.000 l/h
Rule electric bilge pump 14.005 l/h in line with new offshore sailing regulations
Optional Forespar racing marelon flush valves

Deck and Cockpit
Harken Performa black winches
Harken windward sheeting car and mainsheet to winches
Harken transverse jib tracks and ball bearing cars
Harken/Antal ball bearing halyard lead blocks
Harken/Antal ball bearings blocks
Harken composite control blocks
Spinlock clutches
Custom alloy fairleads
Custom stainless-steel chainplates recessed in hull
Composite mast collar
SS stanchions, pulpit and pushpit socketed to laminated bases
SS lifelines, Blue Wave terminals
BSI Moonlight alloy trim portlights
BSI Moonlight foredeck hatch
Acrylic coach roof windows
Recessed companionway sliding hatch
Molded toe rail to mast
Optional Nomen folding cleats black 250 mm x 4 pieces

Electrics
12V circuit
Victron Energy AGM deep cycle house batteries
Victron Energy starter battery
BEP Marine battery switchesBEP Marine distribution switch panel
Victron Energy battery management system
LED interior lights
ISO wiring
Optional Victron Energy battery charger

Engine
Yanmar 30 Hp diesel engine with sail drive
Enclosed engine compartment, soundproofing foam
Vetus rotomolded 60 l diesel tank
Vetus water lock
Southco diesel fill on deck
2 bladed Radice folding propellers
Teleflex single lever engine control
Optional Spinlock ATCU lever