1973 Chris Craft Lancer 23, 27 500 EUR

Chris-Craft Lancer 23 – 1973 – 300 hp MerCruiser 350 V8 from 1999

Beautifully maintained 1973 Chris-Craft Lancer 23, located in the Gothenburg archipelago, Sweden.

A genuine classic in very good condition, with documented history and indoor winter storage. The boat is well maintained and ready to enjoy.

The boat is powered by a 300 hp MerCruiser 350 V8, installed amidships and driving through a straight shaft. The engine is easily accessible and has always been serviced according to the manufacturer’s recommendations. It has freshwater cooling system and the seawater side has conection for easy freshwater flushing.

The amidships engine and straight-shaft configuration give the boat a very smooth and predictable ride with no pronounced planing threshold, making her enjoyable at both low and high speeds. Top speed is approximately 32 knots.

The hull has an epoxy-treated bottom and retains its attractive original gelcoat.

Specifications

• Year: 1973
  
• Model: Chris-Craft Lancer 23
  
• Length: 23 ft
  
• Beam: 2.44 m
  
• Draft: 0.70 m
  
• Hull: Fibreglass
  
• Engine: MerCruiser 350 V8
  
• Power: 300 hp
  
• Fuel: Petrol
  
• Propulsion: Straight shaft
  
• Top speed: approx. 32 knots
  
• Weight: approx. 1,700 kg
  
• Berths: 2
  

Equipment

• ZipWake trim tabs
  
• Raymarine chartplotter
  
• VHF
  
• Bluetooth stereo with four speakers
  
• Harbour cover
  
• Full cover with
  
• Carpets
  
• Engine-cover seat cushion
  
• LED lighting in cabin
  
• Two batteries
  
• Electric bilge pump
  
• Windshield wiper
  
• Navigation lights
  
• Horn
  
• Fire extinguisher
  
• Anchor, mooring lines and fenders
  
• Numerous fishing-rod holders
  
• Reinforced foredeck
  
• Storage cradles
  

Condition:
Well maintained and in very good condition for a classic boat of this age. Some patches on deck with thin original gelcoat.

The boat has been stored indoors during winter, has a documented history, and has been regularly serviced.

The original gelcoat is in very good condition and the bottom has been epoxy treated.