2017 Seascape 18, 25 900 EUR

Get your hands on this pocket rocket sailing boat and experience the best sailing you have ever had! Take advantage of the lifting keel and enjoy mooring in shallowest bays and ports. After your sailing weekend is over, put boat on the trailer and bring it home. Join aboard one of Europe's fastest growing sailing classes, challenge your racing spirit and discover the joy of effortless sailing at high speeds safely and in total control.
SPECIFICATIONS
Vessel: SEASCAPE 18
Vessel type: Sailing boat
Designer: Manuard YD
Builder: Seascape
Year constructed: December 2017
Length (LOA): 5.50m
Beam: 2.37m
Max / min draft: 1.50m / 0.15m
Hull / deck material: Glass Fibre
Keel type: Lifting Keel, laminated
Displacement: 500 kg

This boat was used for only three seasons and it is in excellent shape like new.
PRICE: 25.900 EUR
• Location of boat: Croatia (Privlaka/Zadar), registered in CRO registry under ZD287027
• Contact: Igor (####@qmer.si)
INCLUDED IN THE PRICE
• Road trailer LOK (new rims with tyres)
• 1 set of sails
• Custom made top boat cover for transport and parking
• Mast and boom transport cover
• Rudder’s storage bag
• Acryl lazy bag & jack for main sail with extensions for deck
• Outboard engine TOHATSU MFS5C-S 5KM (like new)
• Autopilot ST1000 plus
• Onboard compass
• Solar panel 83Wp with solar controller and battery for on board 12V electricity
• and much more…

SAILS
• Black Poly One Sails (racing edition 2017)
• 1x Full batten square top mainsail: 14.5 m²
• 1x Furling jib with vertical battens: 8.5 m²
• 1x standard Asymmetric spinnaker with retrieval system: 32 m²
• Jib protection cover
DECK EQUIPMENT
• Opening hatch on the front deck for light and ventilation
• Extending carbon fibre bowsprit with custom asymmetric spinnaker snuffer system
• Jib furler with accompanying equipment
• Ronstan blocks and cleats for the mainsail, jib and asymmetric spinnaker control lines
• Composite tiller with Ronstan tiller extension
• Soft (neoprene) entrance door cover for sailing and storage
• Foot straps for hiking and safety
• Underdeck storage place with PVC doors on deck floor
• Inside and outside storage bags
• Inside LED light
• Radio with USB
• El. pre-installation for autopilot
• …
MAST & RIGGING
• Compotech mast and boom built in carbon fibre with local reinforcements
• Mast protected with UV resistant foil, boom and bowsprit spray-painted with UV clear-coat
• One mainsheet with cleat, swivel, ratchet and 4 ball bearing low friction blocks
• Outhaul with 1:4 purchases inside the boom
• One 1:6 boom vang
• Two 1:2 jib sheets with blocks and cleats
• One 1:2 Spectra main halyard with cleat
• One 1:4 Cunningham control line with blocks and cleats
• One Spectra jib halyard
• One masthead spinnaker halyard/asymmetric spinnaker retrieving line
• One bowsprit control line
• Two spinnaker sheets
CONSTRUCTION
• Hull and deck constructed with hand layup of foam sandwich with glass fibres, polyester and vinylester resin
• Stainless steel chain plates for shrouds and forestay bolted to the hull
• Hull is reinforced with a stringer and bulkheads of the two non-submersible chambers
• Deck with moulded high traction non-skid
• 2 rudders (GRP foam sandwich) mounted in custom aluminium cassettes
• Bolts, screws and fittings are all made of marine grade stainless steel
• Hull and deck are moulded in single tone off-white
KEEL ARRANGEMENT
• Swing keel built in cast iron with additional lamination
• Stainless steel winch for hoisting the keel
• Safety pin arrangement for the keel on the keel box