2015 Jeanneau Sun Fast 3600, EUR 150.000,-

Sun Fast 3600 – 2015 (Launched 2016)

This Sun Fast 3600 is configured as a genuine offshore racing yacht, not a standard production setup. Built in 2015 and launched in 2016, the boat combines infusion-moulded construction with a lightweight racing fit-out and carbon components throughout.

The hull is paired with twin rudders and a lead keel, delivering high-speed control and predictable helm balance when pressed offshore or sailing deep angles. Steering is via twin carbon wheels, providing redundancy and weight reduction aft.

The rig package is centred around a full carbon mast, significantly reducing weight aloft and improving righting moment and upwind efficiency. The sail inventory is complete and race-oriented, all supplied by Incidences (France), manufactured between 2015–2016 and minimally used. The S2 symmetrical spinnaker, supplied with a carbon spinnaker boom, was added specifically for the 2017 racing season.

The yacht is equipped with a B&G electronics suite, suitable for offshore racing and navigation (full details available in the Pochon / Iridium documentation).

The interior follows the Sun Fast 3600 offshore layout:

Two aft cabins with pipe berths
Saloon with opposing bench berths suitable for offshore crew rotation
Dedicated navigation station
Compact galley to starboard
Separate head forward, directly accessible from the saloon
This configuration prioritises weight distribution, crew functionality, and compliance with offshore race requirements rather than cruising comfort.
The boat has proven offshore credentials, having participated in the 2017 Rolex Fastnet Race, confirming both preparation level and structural suitability for Category 2/1 style events.

Key Features

Carbon mast
Twin carbon steering wheels
Lead keel
Twin rudders
Complete Incidences sail inventory (2015–2016)
S2 symmetrical spinnaker with carbon pole
B&G offshore electronics
Fastnet Race 2017 participant
Please contact us for further information


Equipment:

Electrical Equipment

Battery Charger
Electric Bilge Pump
Hot Water
Shore Power
Batteries (2015)

Navigation & Communication Equipment

3 x Mast Displays 20/20 HV
Vertical Wind Sensor
Compass Mini Gyro RC42N
3D Sensor H5000
Pilot Controller H5000
Pilot Processor H5000
Graphic Display H5000 at the Chart Table
Digital Display TRITON T41
Rudder Feedback Sensor RF25N NMEA 2000
Pilot Motor DD15 Drive Unit
GPS Antenna ZG100 ZEUS
Speed Sensor
Depth Sensor
Remote Control Autopilot WR10
VHF ASN with AIS V50
AIS Antenna XB8000 Vespermarine
Splitter Antenna AIS VHF Vespermarine
GPS GP32

Domestic Equipment

Gas Stove
Refrigerator

Accommodation

2 x Cabins
1 x Head

Sails & Rigging

Sails
Brand: INCIDENCES
The sails are almost not used.

Mainsail
2 full batten and 2 leech battens.
Battens pockets protected by straps sawn both sides.
Battens installed in nylon receptacles on luff and leech.
Tension to be adjusted on leech
Rutgerson cars for battens
Radial patches at head, tack, clew and reefs.
Free foot
Tack: Strapped ring
Head: square top with batten
Clew: pressed ring with collar around the boom.
Reef tack: pressed ring + webbed ring.
Reef clew: pressed ring
Seams stitched using 3 steps with white UV protected thread.
Leech line with purchase using blocks.
Aluminium clam cleat at each reef exit on luff.
Draft stripes, tell tales, transport bag. .
Area : 39.60 m²
Cloth : D4 Black Aramid/taffeta one side
Weight : 17 500 dpi

J1
Luff adapted for Tuff Luff
Tack: Webbing reinforcement in tack.
Clew: Rutgerson type ring or webbing only.
Seams stitched using 3 steps with white UV protected thread.
Leech line with purchase using blocks, Aluminium clam cleat protected in a pocket.
Foot line.
Draft stripes, tell tales, transport bag.
Area : 32.5 m²
Cloth : D4 Black Aramid/taffeta one side
Weight : 12 500 dpi

J3
Luff adapted for Tuff Luff
Tack: Webbing reinforcement in tack.
Clew: Rutgerson type ring or webbing only.
Seams stitched using 3 steps with white UV protected thread.
Leech line with purchase using blocks, Aluminium clam cleat protected in a pocket.
Foot line.
Draft stripes, tell tales, transport bag.
1 reef
Area : 23 m²
Cloth : combination Dacron and Spectra/Dyneema
Cut: Triradial
Weight : H 303/343

Trisail
Area : 10 m²
Cloth : Orange Dacron
Weight : 8.3 oz - 350 g
Cut : Cross Cut

Storm Jib
Hanks on jib or similar system
Tack and Head: strapped rings.
Clew: strapped ring or webbing only
Seams stitched using 3 steps with white UV protected thread.
Leech line with purchase using blocks, Aluminium clam cleat protected in a pocket
Foot line
Draft stripes, tell tales, transport bag.
Area : 8 m²
Cloth : Orange Dacron
Weight : 8.3 oz - 3

Sail Cover
Cover in acrylic (dralon) adapted to sail equipped with slides.
Zip in front of the mast
"Fix lock" type attachment under the boom

Asymmetrical Spinnaker A2
Webbed rings at all corners.
Stripe type patches.
Spinnaker type bag.
Spectra rope in luff.
Area: 128 m²
Material: Nylon
Weight: Nylon 0.75 oz or 0.90 oz
Cut: Triradial

Asymmetrical Spinnaker A5
Webbed rings at all corners.
Stripe type patches.
Spinnaker type bag.
Spectra rope in luff.
Area: 90 m²
Material: Nylon
Weight: Nylon 1.5 oz
Cut: Triradial

S2 spinnaker
Webbed rings at all corners.
Stripe type patches.
Spinnaker type bag.
Spectra rope in luff
Area: 112 m²
Cloth: Superkote 0.9 oz
Cut: tiradial

Deck Equipment

2 x Carbon Fiber Steering Wheels
Swimming Ladder
Cockpit Speakers

Safety Equipment

EPIRB
Floating Handed VHF COBRA H350
Liferaft