2022 Red Sky 29 Antibes, EUR 250 000

Newly constructed Finnish-designed and built motor yacht with classic styling with modern carbon reinforced wood epoxy construction. Fully equipped with everything from a Mercury Verado 300hp engine to a Quick gyroscopic stabiliser.

FURTHER BROKER'S COMMENTS:

Launched in 2022 and with just demonstration hours run on her Mercury Verado 300hp outboard, this beautiful example of the Red Sky 29 Antibes by Finnish-based Red Sky Yachts is now available for sale at a great saving over her new build price.

Designed by Allan Savolainen and constructed using a hybrid wood-epoxy system of mahogany, cedar and carbon fibre, the Antibes 29 combines classic looks with modern design, blistering 40 knots plus performance and levels of stiffness, noise and vibration insulation that can only be found with wood-epoxy builds.

Her specification highlights:-
Triple-layer structure of cedar planking, carbon fibre sheet and 5mm mahogany planking with Douglas fir framing.
V-berth cabin
Windscreen with hardtop bimini
Mercury Verado 300hp outboard engine with 42knots+ perfornance
Sleipner Side Power bowthruster and sternthrusters
Quick MC2 X2 series Gyro Stabilizer
Solar panels
Simrad NSS eco3S 16" chartplotter system with Mercury Vessel-link for seamless integration of Mercury data to Simrad display
"Dubhe" white custom sewn marine vinyl seats on a stainless frame.

MANUFACTURERS COMMENTS:

High tech meets hand made - The eye-catching sheerline of the Red Sky 29 proves that there's really no substitute for good looks. But this classic beauty hides a modern beast: we've made sure, by way of sheer hands-on, high-tech engineering, that the yacht handles every bit as beautifully as it looks.

Building performance from the bottom up - The bottom of the hull is an independent module whose form strikes a perfect balance between stability, manoeuvrability and fuel consumption. The module also houses the whole electrical infrastructure of the boat, an ideally positioned fuel tank, a bow thruster and a mounting platform for the optional Gyro stabiliser.

Modular design: choice without compromise The perfect bottom module accommodates four different, distinctive superstructures and one RIB. Topsides are available as a laminated wooden structure with a carbon fiber internal layer or an epoxy foam cored laminate. The lineup allows for an interesting array of options and customisations.

The grace of classic proportions - Born of Allan Savolainen's pen, the Red Sky 29 discreetly conceals her high tech DNA behind a beautifully proportioned, classic silhouette, honed to detailed perfection by hand in the best tradition of Finnish craftsmanship.

Yachting on rails: the magic of the gyro Gyro stabilisation turns the already stable hull into a train on water, virtually eliminating roll. No roll means no more sea sick days at sea!

The Red Sky 29's Mercury engine is the only one on the market to produce enough electricity to power a gyro, in addition to catering to the needs of all the other electrical systems on board.

ABOUT RED SKY YACHTS:
Red Sky Yachts is a unique combination of a generations-long tradition of non-compromising craftmanship, innovative design and a radically classic aesthetic approach. The boatyard's modern facilities allow it to respond in scale to the most ambitious demands in the field.

Henrik Andersin, Owner: - "My interest in becoming a part of the Red Sky Yachts' story started when I realised that there were only an handful of places on the whole planet to hold such tradition, skill and culture in the manufacture of wooden boats - more often that not, if you really wanted a proper wooden boat, you would have to build one yourself.

I'm convinced that true quality never goes out of style. That's why at Red Sky we build boats to last - not just technically, but also aesthetically - and to be proudly handed from one generation of owners to the next, gathering not only value with age, but also grace."

Chris Winter, Manager:- "It's the extensive restauration of the 12mR yact Blue Marlin that put us in league with the best in the world. Coping with the inspiring challenges of a project of such magnitude gave us the chance to develop the facilities and the contractor network without which no ambitious project can get off the ground.

Allan Savolainen, Master boat builder and designer:- "We like to innovate, but not only for the sake of innovation. As an example, for the new Red Sky 29 we came up with an innovative modular production technique, that not only speeds up the process of building a wooden boat, but also allows us to build one-off boats in a small series. Embracing new technologies also helps us define and better execute what our clients ultimately want, which is absolute quality - no compromises, no shortcuts, no ifs and no buts. That's what Red Sky Yachts is fundamentally about."


SPECIFICATION
CONSTRUCTION:

RCD Status:
Our understanding is that the vessel complies with the European Union Recreational Craft Directive and is categorised CE - C

Hull, Deck & Superstructure Construction:
Hull: Gurit Corecell M foam core infused with Gurit Epoxy resin and S glass post cured.
Floor: Gurit Corecell M foam core infused with Gurit Epoxy resin and S glass, post cured and finished with a glued 6mm strip teak surface.
Deck: Tongue and groove red cedar covered with epoxy and fiberglass cloth, finished with 5mm strip teak surface.
Console: Marine plywood structure finished with 5mm solid mahogany.
Cabin: Marine plywood finished with 5mm solid mahogany. The ceiling is red cedar plank.
Hull interior: Fully painted with fixed tubing to route cabling and fuel lines.
Gyro Mount: Epoxy bonded for installation of Quick MC2 X2 Gyro Stabilizer.
Roof: Epoxy saturated S glass mounted on hollow mahogany posts.
Wooden topsides: Three-layer structure of cedar planking, carbon fibre sheet and 5mm mahogany planking with Douglas fir framing.
Gunwale: Solid teak.
Rubbing Strake: Rubber with stainless bullet ends mounted aft and faired into the swim platforms.
Transom: Foam cored mahogany and epoxy structure with a door opening onto the starboard swim platform.

MACHINERY

Engine & gearbox:
Mercury Verado 300hp
Mercury integrated engine gauges into the Garmin electronics package

Maintenance & Performance:
Engine hours: approx. 50 as of May 2024
Last date of engine service: Spring 2024
Cruising speed: approx 35 knots
Maximum speed: 42 knots

Propulsion & Steering:
Enertia RH 3BL SS propeller
Mercury hydraulic power steering
Ros industry "Rigel" wheel
Bennett M120 sport tabs
Sleipner Side Power bowthruster SE40/125S2
Sleipner Side Power sternthruster

Stabilization:
Quick MC2 X2 series Gyro Stabilizer

ELECTRICAL SYSTEMS

Voltage systems:
12vDC primary domestic system with 220vAC via shore power

Battery Banks:
200Ah Victro Energy lithium service battery
75Ah Optima starter battery
75Ah Optima battery for bowthruster
Victron energy BMV712 battery monitor with built in Bluetooth for remote app use

Shorepower:
18A Victron energy and 20m shore power cable

Solar Panels:
2x solar panels on bimini top with Victron Energy charge controller

Other Electrical:
12V sockets
USB outlets

PLUMBING

Bilge Pumps:
12vDC electric automatic float switch bilges pump
Manual bilge pump

TANKAGE

Fuel:
Arifim custom 300L stainless steel fuel tank
Fuel tank level monitoring

NAVIGATION & COMMUNICATION EQUIPMENT
Simrad NSS eco3S 16"
Simrad V60-B VHF
Built in Simrad AIS transceiver and receiver
Totalscan 3D echo
Ritchie S 53 fixed magnetic compass
Mercury Vessel-link for seamless integration of Mercury data to Simrad display


DOMESTIC EQUIPMENT

Dometic CoolMatic CB 36W refrigerator
Small chemical portable toilet

ACCOMMODATION

Accommodation Finish:
High quality upholstery.

Description of Accommodation from Forward:
2 berths in 1 cabin.
2 upholstered cushion V berth
Port and starboard cabinets with doors
Storage lockers forward and under the berth
Sliding door in Polycarbonate
Helm station centred
2x "Dubhe" white custom sewn marine vinyl seats on a stainless frame. The folding backrest and easily adjusted sliding seat cushion allow a comfortable sitting or standing position
2x small compartments under the forward seat
2x "Dubhe" white custom sewn marine vinyl seats on a stainless frame. The seat is fitted with a folding and reversable backrest so passengers can stand or sit comfortably facing forward or aft. These seats are mounted on gas spring pedestals for great viewing facing forward or adjusted to the picnic table height when facing aft.
The aft bench with white custom sewn marine vinyl over soft padding. The seat is mounted over a mahogany storage box.

DECK EQUIPMENT
Arifin Custom port and starboard pulpit
Two fixed cleats midships and two retractable aft
Stainless stell hinges
Stainless stell latches
Lockable locker below stern bench

Anchoring & Mooring:
7,5kgs stainless steel anchor with 50m 14mm weighted anchor line.
Anchor locker in the bow with fixed mount
Docking kit 4x4m and 2x10m 12mm PSE
Anchor lights
Warps & fenders
Rubber fender guard at bow

SAFETY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Navigation lights
Handheld flares and parachute flares in a water-resistant container
2x 2kg Fire extinguishers


VIEWING ARRANGEMENTS
Lying Kotka, Finland

Available to view strictly by appointment

Office Hours Mon- Fri 0900 - 17.00
Saturday by prior appointment

For more information or to arrange a viewing please contact us.

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

Lead broker: Jonas Renlund - Grabau international (Scandinavia)
Tel: +358 408098688
Email: #####@grabauinternational.com