- 44
- Delen
Meta Joubert-Nivelt 53
Aluminum Expedition Yacht
- Lengte x Breedte16,15 m x 4,66 m
- Diepgang2,50 m
- Bouwjaar1998
- MateriaalAluminium
- AanbiedingstypeTweedehands boot
- BootnaamAdak
- MerkMeta
- ModelJoubert-Nivelt 53
- Staatzeer goede staat
- StuurinrichtingStuurwiel
- Aantal kajuiten3 kajuiten
- Aantal kooien8 kooien
- Toiletten2 toiletten
- Douches2 douches
- Drinkwatertank300 l Water
- AandrijvingAsaandrijving D-Drive
- MotorJohn Deere
- Motorvermogen1 x 150 pk / 110 kW
- Brandstof2.000 l Diesel
- Actieradius2000 nm
Heeft u meer details nodig?
Locatie
Canada » Sidney
Opmerkingen
1998 Meta Joubert-Nivelt 53, USD 395.000,-
Dit is de tekst in de originele taal.
Helaas is er geen automatische vertaling beschikbaar voor deze tekst.
(max. 2100 tekens)
Een ogenblikje alstublieft, we vertalen de tekst voor u.
Helaas kon de tekst niet automatisch worden vertaald.
Adak was built in France in 1998 for high-latitude cruising. META built the hull to a Joubert-Nivelt design using its Strongall method, with no conventional framework: the welded plate carries the loads, from 20 mm on the bottom to around 11 to 12.5 mm on the topsides and deck. Many aluminum boats that have worked in ice show a pattern of dents. Adak came out of a season in Alaskan waters with no sign of impact or hull deformation.
In 2015 she was bought by Ross Field, a Whitbread Race winner and veteran of five circumnavigations. He gave her a major refit at Berthon in Lymington, UK, including the John Deere engine, sails and watermaker, and in 2017 sailed her to West Greenland on an attempt at the Northwest Passage. Shipped to New Zealand in 2020, she received an updated including a full B&G electronics upgrade and the Fischer Panda generator.
Following another update she departed New Zealand in 2026 on 9,300 nm voyage via New Caledonia, the Marshall Islands and the Aleutians to Alaska and British Columbia. Her motoring range is exceptional: at 8 knots she burns about 8 l/hr, giving roughly 2,000 NM from 2,000 l of fuel, enough to work high-latitude coasts where the wind is light, contrary or blocked by ice.
Adak was bought in 2026 for the Ice Frontiers project. After a successful first season, the project now needs a larger expedition vessel. This is not a distressed sale: a winter refit is planned and a 2027 season in the Aleutian Islands and Bering Sea is scheduled. If she goes under contract, the refit and 2027 plans will be adapted to the buyer.
The asking price is for the vessel as she stands. Refit costs incurred after November 1, 2026 are passed on to the buyer at cost, supported by invoices. After closing, the buyer may change or cancel any refit work not yet completed, and the owner is willing to keep managing the refit on the buyer’s behalf.
Meta Joubert-Nivelt 53
Name Adak
Year 1998
Builder META, France
Designer Joubert-Nivelt
LOA 53’ (16.26 m)
Beam 15’3” (4.65 m)
Draft 8’2” (2.5 m)
Displacement 37,500 lbs (17 t)
Hull Welded Aluminum (Strongall)
Deck Welded Aluminum
Steering Wheel, emergency tiller
Keel Fin keel, fully welded
Rudder Skeg-hung
Engine John Deere 150 hp
Generator Fischer Panda 10 kW
Fuel 528 gals/2,000 l
Water 79 gals/300 l + watermaker
Hot Water Yes
Holding Tank Yes
Flag UK (Part 1 registered)
CONSTRUCTION
Optimized for high-latitude adventures
Built by META using its Strongall method: thick welded aluminum plate with no internal ribs or stringers, so hull and deck work as one structure
Graduated plate: 20 mm bottom, 18 mm next strake, approx. 11 to 12.5 mm topsides and deck
Plate spreads impacts instead of denting between frames. No sign of impact or hull deformation at her October 2026 haul-out after a season in Alaskan waters
Fully welded fin keel with skeg; nothing bolted on to be lost
Skeg-hung rudder, cable steering to quadrant, emergency tiller
8 cm continuous foam insulation lining the hull to below the waterline; warm and dry in cold water
No internal frames to work around, so hoses, wiring and new equipment are easy to run
COCKPIT
Single helm station
Bimini (to be replaced by a welded aluminum doghouse in the winter refit, see below)
Hot and cold cockpit shower
Swim ladder and davits
INTERIOR
Interior fitted in solid wood
3 double cabins plus 2 single quarter berths; sleeps 5 to 8
2 manual heads, 2 showers
Headroom 6 to 7 ft in cabins and saloon
Workshop with freezer
Redundant diesel heating: Eberspächer heater and Refleks 60M heater with 30 l day tank
Bed linen included
GALLEY
ENO two-burner gas cooker with oven, certified April 2026
Refrigerator in galley, freezer in workshop
2 aluminum gas cylinders
Standard kitchenware included
MECHANICAL
John Deere 4045TFM50, 150 hp diesel, installed 2016
Approx. 2,400 hours (Nov 2026)
Shaft drive, PRM 750A gearbox, Max-Prop 3-blade feathering propeller
Cruise 8 kn at approx. 8 l/hr, max 11 kn
Range approx. 2,000 NM under power at 8 kn
2,000 l fuel; fuel can be transferred between tanks
Engine serviced March 2026; fuel tanks emptied, cleaned and inspected March 2026
Fischer Panda 10000i 10 kW generator
ELECTRICAL + PLUMBING
Fully Ready for extended Off-Grid Adventures
24 V DC house system
New 2026 house bank: 4 x 6 V AGM Deep Cycle 11,040 Wh (equivalent to 920 amp-hrs at 12 volts).
Separate engine and generator battery
Mastervolt charger, Victron Phoenix 800 W inverter, Victron BMV 712 monitor
Watt&Sea 300 W hydrogenerator, D400 wind generator, 2 x 200 W solar blankets
220 V shore power with galvanic isolator
Wiring in place for a dive compressor
Watermaker: Spectra Cape Horn Extreme, 50 l/hr, with Z-Ion cleaning
300 l water in 2 tanks
50 l hot water tank (Ventus, 240 V)
Holding tank on starboard head
Salt water deck wash in chain locker
INSTRUMENTS
Full B&G suite, upgraded 2022-23
B&G Zeus 3 chartplotter plus Zeus 2 backup
B&G Halo radar
B&G autopilot: NAC-3 computer (plus spare), H5000 Edge processor, T3 ram (plus spare ram)
B&G GPS compass and Precision-9 compass
B&G WS320 wireless wind sensor, P319 depth transducer
B&G AIS
B&G V50 VHF with H50 wireless handset
Icom M94D handheld VHF with GPS and AIS
Starlink high-performance dish with PredictWind DataHub
Fusion Bluetooth stereo
SAILS & CANVAS
New North Sails Radian Ultra mainsail, genoa and staysail on order, delivery spring 2027
2016 North Sails genoa and staysails kept as spares
Three reefs in the main
Spinnaker included
Bimini
RIGGING
Aluminum cutter rig with inner baby stay – a great robust expedition and offshore configuration.
Standing rigging replaced 2026
Dyneema running rigging (2017)
Furlex furlers on genoa (2025) and staysail (2026)
Carbon fibre spinnaker pole
Manual winches
DECK GEAR
Rocna 55 kg primary anchor and folding spare anchor
100 m chain
Windlass with chain counter and remote control
Stern anchor with anchor roller
Shore lines: 2 x 80 m and 2 x 100 m floating
Mooring lines, fenders, boat hook
AB Lammina 3 m aluminum RIB (new tubes 2022) with Suzuki 15 hp 2-stroke (2024), on davits
SAFETY
Ocean Safety 8-person liferaft, serviced April 2026
Ocean Signal rescueME EPIRB, battery to 2036
4 offshore lifejackets with tethers, 1 coastal lifejacket, 3 foam PFDs
2 CO2 and 3 foam extinguishers, serviced April 2026
Manual bilge pumps (cockpit and forward); new electric bilge pumps aft, midships and forward (2026)
Drogue, MOB equipment, offshore flare kit (2026)
Hydraulic rigging cutters, offshore first-aid kit
WINTER 2026-27 REFIT
At Philbrooks Boatyard, Sidney: work January to March 2027, recommissioning and trials April 2027
Welded aluminum doghouse over the companionway, roof extended over the cockpit table, open aft with roll-up canvas panel
New watertight companionway door
Welded aluminum stern arch, with no stainless-to-aluminum contact on the hull
Engine air intake moved into the doghouse and engine-room exhaust to the stern arch
Mainsheet and traveller moved to the doghouse roof; winch sheets led to the cockpit
Independent second autopilot
Remote throttle and autopilot controls for docking and ice navigation
Isolation transformer; shore power reworked for both 120 V and 230 V
New breaker panel, AC outlets on inverter, USB ports in cabins
Rig check repairs and hardware renewal by Blackline Rigging, Sidney
Keel and hull interior inspection (corrosion and epoxy coating); antifouling patched or redone as needed
Scope may change; final work list and invoices available to buyers
MAINTENANCE + DOCUMENTATION
Full survey including hull, February 2026
Antifouling March 2026; deck last painted 2016
2026 expedition track: predictwind.com/tracking/SV-Adak
Photos and blog posts at IceFrontiers.com
Her 2017 Greenland voyage is told in Wild Seas to Greenland by Rebecca Hayter (2021)
Listed by Max Shaw
Deze tekst is automatisch vertaald.
Video
Services
Jachtverzekering van Pantaenius
Gratis offerte aanvragenFinancier uw droomboot met marinefinanz
Bereken en vraag nu uw vrijblijvende offerte aanAankoopexpertise van Yachtexpertise
Neem hier contact opEU-btw en de status van goederen uit de Unie
Laat nu gratis uw btw-status beoordelenJachtvervoer en -leveringen
Vraag vandaag nog een gratis prijsopgave aan voor de route van uw keuzeOfferte voor boottransport aanvragen
Ontvang gemakkelijk offertes voor uw boottransport


































































































































