2020 Beneteau Oceanis 46.1, USD 215.000,-

2020 BENETEAU Oceanis 46.1 – Hispaniola

BUILDERS REMARKS: The Moorings 46.1 is boat for demanding owners who are on the lookout for a cruiser which will whet the appetites of both crews and bystanders hanging around the marina. The superb design of the hull is the brainchild of Finot-Conq, the famous naval architects working out of Vannes. They have designed model with a wide-beam, high performance hull, characterized by a novel step one third of the way along, and which is steered by a pair of twin rudders. The uncluttered deck layout and the fact that the hull widens out towards the stern, ensures that the helmsman has a reassuringly clear view of what is going on in front of him.

The interior is in the same vein, immediately confirming the impression of quality and good-workmanship created up on deck. The gently sloping companionway ensures safe access down to a bright and modern living space, designed with typically Italian flair for style and comfort by Nauta Design, and which your future crews will certainly be eager to discover.

BROKERS REMARKS: Hispaniola is a 2020 Beneteau Oceanis 46.1 in the 3-cabin owner’s layout. Located in Saint Lucia. Asking price is USD 215,000. Yanmar 4JH57 (about 2,508 hours), generator, and air conditioning. Phase-out in Saint Lucia is complete.

AVAILABILITY: Phase-out in Saint Lucia is complete. Contact the Fort Lauderdale office to schedule a viewing.

Manufacturer Provided Description The Oceanis 46 boasts all the features of a large cruising yacht, with a rare balance between elegance, usable space and performance. Her stepped hull opens up an incredible amount of space inside and yet her seakeeping performance is still impressive. A large number of clever customizable fittings make her easy to sail and pleasantly comfortable.

The Oceanis 46.1 is based on a Finot-Conq plan, keeping the distinctive stepped hull of the 51.1. Apart from her performance at sea and the huge amount of space that set this boat apart, this architecture makes optimal use of the cockpit beam. An incredibly efficient deck plan makes her wonderfully safe and easy to use. The furling mast, self-tailing jib and all the halyards and sheets brought back to a single winch at each of the helm stations, make manoeuvring simple when short-handed sailing.

Additional Information Additional Specs

CONSTRUCTION

* HULL CONSTRUCTION: Glass Reinforced Plastic (GRP)
* DECK MATERIAL: Injection molded deck in glass/balsa sandwich
* RUDDER TYPE: Twin rudders hung with stainless steel stock
* KEEL TYPE: Shallow Cast iron keel
* WHERE BUILT: NC, USA


ENGINES AND CONTROLS

* ENGINE LAST SERVICED: every 3 months
* ENGINE 1 HOURS RUN/DATE: 2508 – Dec 2025
* GEARBOX: Saildrive SD50
* CONTROLS: TFX


SAILS AND RIGGING

* TYPE: Sloop
* SPAR MAKER/MATERIAL: Aluminium
* STANDING RIGGING MATERIAL: Stainless steel wire
* RUNNING RIGGING MATERIAL: Cored braided line
* MAINSAIL REEFING: Classic slab reefing
* HEADSAIL ROLLER FURLING: Profurl
* BOOM VANG: Rigid


WINCHES

* GENOA WINCHES: 2 self-tailing Harken 50
* MAIN HALYARD WINCH: 2 self-tailing Harken 40 (electric)


INSIDE EQUIPMENT

* FANS: Yes
* FRESH WATER PUMP: Yes
* COOKER TYPE: Eno 3 burners
* SINK: 2 rectangular basins in galley
* SHOWERS: 3 + transom shower
* HANDBASINS: 3
* UPHOLSTERY/COLOUR SCHEME: Faux leather saloon cushions and grey covered foam mattress in cabins
* INTERIOR CONSTRUCTION/WOOD TYPE: Light satin oak interior
* COOKWARE: Yes
* LINENS: Yes


ELECTRICAL EQUIPMENT

* VOLTAGE: 12V
* ELECTRICAL CIRCUIT: 110V
* HOUSE BATTERIES: (4) x AGM 100Ah each
* ENGINE BATTERIES: (1) x 100 Ah
* ALTERNATOR: 12V/125 Amp


DECK EQUIPMENT

* STEERING SYSTEM: Twin wheel
* DODGER: Yes
* WARPS: 4
* FENDERS: 5
* WINDLASS: Quick 1000W electric with 10mm gypsy and hand control wired direct & cockpit chain counter
* PRIMARY ANCHOR: Delta, all chain rode
* SECONDARY ANCHOR: Britanny with chain and rope
* Electronically controlled, fully opening transom, convertible into swim platform with natural solid wood decking (2.85m x 0.77 m / 9ft 4in x 2ft 6in)