Italia Yachts 1098

EUR 175.000,-
IVA incl.

Città

Italia » In Verkoophaven

Contattare l'inserzionista

Altri dettagli

Italia Yachts is a new brand with a long history. A fresh though classic design by Maurizio Cossutti and built by fifty year old shipyard Cantiere Bar

Construction The boat is built according to the European Certification of compliance CE for pleasure craft "A" category. Hull and deck are constructed in sandwich with differentiated density PVC core; the unidirectional and biaxial E-glass fibres are laminated with vinylester resin. The lamination is carried out at controlled temperature between 16 and 25 degrees. Aluminium and plywood plates are included in the structure to increase resistance where the deck hardware is mounted. The collar of the mast is made in composite. There is a structural carbon reinforced frame glued and laminated to the hull bottom. The structural bulkheads are made of marine plywood and gusseted to the hull and glued to the deck. The deck is glued and laminated to the hull. Cockpit benches and cockpit bottom are covered with teak. The toe rail is also in teak. Keel & Rudder The keel is T-shaped with steel structure and the torpedo is cast lead. The rudderblade is laminated in fiberglass with PVC core. The aluminium rudderstock is biconical. The stock bearings are self aligning. The steering wheel is in leather covered steel with a diameter of 140 cm. Deck gear Stainless steel pullpits including attachments for lifelines and LED navigations lights. Stanchions are 610 mm height. Removable anchor arm in stainless steel with anchor roller and attachment point for gennaker. Flush deck hatches. 2x Harken 46.2 STA primary winches 2x Harken 40.2 STA mainsheet winches 2x Harken 40.2 halyard winches German mainsheet system below decks incl Ronstan ballbearing blocks Genoa track 1.20mt with ballbearing system and 1:5 purchase Dyneema backstay with purchase 48:1 8x Spinlock stoppers Padeyes for spinnaker sheet, downhaul, cunningham, guys and lifelines All sheets and halyards are manufactured by Gottifredi Maffioli Mast & Rigging Fractional double spreader aluminium mast and boom (John Mast) Discontinuous rod rigging with rod turnbuckles. Electrical 12/220 V system battery charger 20 Ah Engine Lombardini 30 hp diesel Saildrive transmission 2-bladed folding propeller Single lever control Instrument panel with counter, water temp. alarm and oil pressure alarm Tanks Diesel 1 x 110 liter Water 1 x 160 liter Holding tank Interior Teak veneered interior and bulkheads with satin finish L-shaped galley incl. 2-burner stove + oven, refridgerator with accumulator plate, hot and cold water mixer tap and 2 stainless steel sinks. Two long sofas (196 cm) and folding table, convertable to two berths. Charttable with seat, drawers and storage. Double berth in front (205 x 1.75 x 65 cm) with 2 wardrobes and storage below berths. Head compartiment on SB side with toilet, mirrors, cabinets, shower. Aft cabin on port side with double berth (240 x 140 x 115 cm)

Bach Yachting

Barche usate simili (Yacht a Vela)

Italia Yachts 10.98 Yacht a Vela
Italia Yachts 10.98
10,98 m x 3,65 mEUR 160.000,-
Italia Yachts 12.98 Yacht a Vela
Italia Yachts 12.98
12,98 m x 4,16 mEUR 296.000,-
Italia Yachts 13.98 (New Built) Yacht a Vela
Italia Yachts 13.98 (New Built)
14,40 m x 4,30 mEUR 359.000,-
Italia Yachts 1298 Yacht a Vela
Italia Yachts 1298
12,98 m x 4,16 mEUR 369.000,-

Vuoi vendere una barca?

Inserire la propria barca!

Vendere barca a vela
Italia Yachts 1098
Italia Yachts 1098
Italia Yachts 1098
Italia Yachts 1098 Italia Yachts 1098
Indica tutti gli immagini

Servizi

Informazioni

Permalink / Annuncio-ID: https://www.boat24.com/112654

Visitatori: 5.464