Baltic 56

EUR 650.000,-
incl. IVA


España » Palma Espagne

Formulario de contacto

  • Al enviar este formulario, tus datos de contacto se enviarán al vendedor de esta oferta.


Baltic 56 for sale: BIONC ELK, build 2005, is certainly an excellent example of maximum flexibility with Baltics semi-custom line. The deck and interior layouts are 100% custom, tailor designed and styled by Judel/Vrolijk & co to suit the clients ´ wishes. The technology level is extremely high, utilizing pre-preg carbon laminates, foam sandwich in the hull with a honeycomb sandwich in the deck laminates. The boat is also equipped with a canting keel system, allowing the keel to swing 40 degrees to each side boosting the sailing stability without making the boat heavy. Yacht and equipment are constantly maintained and upgraded. A must see to be appreciated. For more information and to arrange a viewing please contact Hanne Niederbracht at the Palma office or call 0034 616 04 68 50 RigSloop SLOOP RIG Mast. Hall Spars deck-stepped fractional in 34-700 standard modulus carbon fibre. One piece mast. Mast finish, clear coated March-2017 by Nautipaint Palma. Two sets of fully tapered carbon fiber 'straight airfoil spreaders Rod standing rigging replaced March -2017 by RSB Rigging in Palma de Mallorca (except backstay) Boom. Female moulded deep "V" ˜Park Avenue' cored section autoclave cured pre preg 34-700 carbon fibre - clear coated March-2017 by Nautipaint Palma Mainsheet system with Fredriksen traveller on cockpit sole aft of Helm. Mainsail track Antal 60, accepts bolt rope and sliders. Self tacking jib system, Fredriksen. Additional side deck tracks. Carbon fibre forestay with manual sub-deck furler led aft to electric winch at helm Lazy Jacks Navtec hydraulic adjustable split backstay, outhaul, boom vang and jib halyard tensioner. Manual control in cockpit Retractable carbon fibre bowsprit for asymmetric spinnakers ELECTRONICS AND NAVIGATION EQUIPMENT: Navigation : B&G H5000 - March 2017 3 Zeus 12 GPS touchscreen chartplotter (2 Helm Station, 1 Charter Table) with broadband radar 4 Display 30/30, mast custom carbon box. 2 Displays Graphic (Helm Station) 1 Pilot Computer (Charter table) 1 Autopilot Controller (Port Helm Station) CPU H5000 main processor, Precision 9 digital compass, speed sensor, traductor sonda and rudder feedback. Simrad RS87 DSC VHF McMurdo Smartfind M5 Class A AIS transponder - 2014 ELECTRICAL SYSTEM: Mastervolt Whisper 6KW generator Gel-cell 41Ah 12V starting battery for main engine Gel Cell 41Ah 12V starting battery for generator Gel-cell 100Ah 24V service batteries Prestolite Gel Cell 400Ah 24V service batteries Sonnenshine Mastervolt 24v/100A battery charger Dolphin 12v charger for engine and generator start batteries DC/AC Inverter Mastervolt Model Mass 24/3500 Shore connection 230 V/AC 50 Hz Mastervolt Whisper 6kw generator Dedicated Racor fuel/water seperator Alternator 24vDC engine mounted alternator for service battery bank. Air conditioning unit is CLD marine, with a main unit (twin compressor 24000BTU) in engine room WATER SYSTEM Spectra Newport 60l/h watermaker Water heater, Sigmar. Heater capacity is 40l heated by engine cooling water and shore power. Heater has the possibility to be drained for racing. Water pressure system with outlets in heads and galley Telephone type shower, water faucet for cold and hot pressurised water Deck shower outlet warm & cold SAFETY INVENTORY 2x 6-man liferafts KIM MOB recovery sling 6x lifejackets Flarepack Automatic fire extinguisher in engine space Fire extinguishers Fire Blanket Yanmar 4JH3-TCE SD DIESEL ENGINE, with following characteristics: 55,2 kW (75 hp) at 3800 rpm 4 in-line vertical cylinders, 4-stroke engine. 1.995 Liters, direct injection, electrical starting 12 V DC. Fresh water cooling for marine application with a heat exchanger an a seawater pump Saildrive reduction gearbox SD60 - fitted November 2017 Digital single lever gear/throttle control at starboard helm Racor fuel/water separator Brunton Varifold 3-bladed folding propeller - November 2016 MAX Power 24vDC retractable bow thruster - Fitted 2009 WINCHES by LEWMAR: 2x Lewmar 77-3ST OR electrical. Port winch: main halyard, jib sheet, furling sheet. Starboard winch: main sheet, reefs and spi halyard. 2x Lewmar 66-3ST OR electrical, gennaker sheets or jib sheets GROUND TACKLE Anchor windlass, Lewmar concept 3 , gypsy only, electrical 24V/DC 2000W incl Anchor Delta 25kg 80m of 10mm chain MISCELLANEOUS: Zodiac tender Evinrude 4hp outboard BALTIC 56 Built by Baltic Yachts, Finnland in 2005 Designed by Judel Vrolijk LOA 17.10m LWL 14.29m BEAM 4.59m DRAFT 3.10m DISPLACEMENT 13.300kg BALLAST 4310kg CONSTRUCTION Hull is built in advanced composite construction using Epoxy infused vacuum bagged sandwich laminates that are post-cured in order to achieve optimum characteristics and strength. Main reinforcements in all laminates are unidirectional and multi-axial Carbon. Hull outer skin incorporates layers of Aramid fibres for added impact resistance and safety. Hull colour: Jaramabeige, metallic . W.L. colour: Silver, metallic Main chain plates fully in composite. Incorporated into the Bulkheads and hull lay-ups. Composite chain plates fitted with bushings and easy removable stainless steel pins. Engine beds incorporated in hull, built up of laminate around a PVC foam core. Special care is taken to ensure a rigid foundation and correct bonding using Yanmars own engine bed for saildrive version Hull Paint is the original, 2005, good condition. Antifouling was done in July-2018 (International Micron 350,Trilux33) Superstructure resprayed in July-2018 ( A Coruña shipyard) Lazaretto painted in July-2018 DECK Deck is built in advanced composite construction using Epoxy vacuum bagged sandwich laminates that are post-cured in order to achieve optimum characteristics and strength. Main reinforcements in all laminates are unidirectional and multi-axial Carbon. High loaded areas strengthened with additional laminate or/and C-plates. Pre-preg deck laminate with Nomex sandwich. Teak deck on side decks, cockpit floors and seats and on the coamings. The teak is epoxy glued to the FRP deck using vacuum bagging technique. No screws and plugs used except for the in the centre pieces and the outboard parts. The teak deck is a structural part of the deck hence laminate can be reduced in the teak decked areas in order to minimise weight. Pulpit and pushpit made of Stainless Steel. The height of pulpits, stanchions, spacing distance,¦ conforms to O.R.C. requirements Stanchions are spigot type, glass fiber type laminated to hull with SS stanchions on top. Fairleads and cleats, Versari & Delmonte 0264AN, 6 pcs. Flag pole in carbon. Swimmimg ladder in metal and Wood.Gangway in carbon. (The swimming ladder and the gangway use same fitting) KEEL & RUDDER Canting keel system with Carbon twin dagger boards Keel fin casted from a high-grade heat treated Stainless Steel Keel bulb in Lead with added Antimon Twin hydraulic cylinders, P&S, for the canting operation Hydraulic power pack 24V/DC for canting keel and dagger board system.The cantilevered semi-elliptical balanced spade rudder is moulded from Carbon and filled with PVC. Foam filling under high pressure in special strengthened mould. The rudder stock is made of high strength, Carbon - Epoxy construction using "Vacu-Press" manufacturing system. The rudder stock is tapered and dimensioned to the corresponding bending moments in order to minimize weight. The rudder stock passes through self-aligning roller bearings and a stuffing box which is strongly bounded to the hull. Rudder bushes replaced 2014 Canting keel hydraulic system completely refitted 2014 Canting keel pistons refitted by Rexroth - 2014 Keel box repainted July- 2018 (A Coruña shipyard) SLEEPS UP TO EIGHT GUESTS IN THREE CABINS PLUS SALOON 8 berths in one double master cabin, two twin guest cabins, two aft pilot berths and occasional settee berths in the aft of saloon (Access to engine room, 80 cm mattress measure) Master forecabin is located at the bow, with centerline queen bed , 1,35 cm, drawers under bed. Hanging lockers to starboard and port sides against bulkhead. Private toilet. Guest cabins starboard and port from corridor. Starboard and port cabins have single bed with pullman bunk above, seat and hanging locker. Bed measures are stb bellow 90 cm, stb up 75-80 cm and port bellow 70-75 cm, up 70-75 cm. Guest cabins have share a toilet with entrance from corridor. Interior covers, mattresses and cushions replaced April 2017 Galley equipped with Galley provided with 2 burner Gaggenau gimballed propane stove with oven. Galley fan with grill in upper locker and channel behind it to suction fan in lazarette Stowage for propane under aft cockpit hatch. Remote solenoid valve. The shut-off at the tank is operated from galley. Gaggenau microwave oven Custom made Frigonautica stainless steel refrigerator and freezer. Refrigerator has two access doors, one on the top for beverages and one on the side. The remote temperature controls at chart table. (May 2017)

Ancasta Palma

Barcos de ocasión similares (Yate a vela)

Wauquiez 48 Pilot Saloon Yate a vela
Wauquiez 48 Pilot Saloon
14,63 m x 4,51 m£ 542.000,-
Bénéteau Oceanis 55.1 Yate a vela
Bénéteau Oceanis 55.1
16,76 m x £ 529.375,-
X-Yachts Xp 50 Yate a vela
X-Yachts Xp 50
15,24 m x EUR 665.000,-
Mac Conaghy Ker 46 + Barco de regata
Mac Conaghy Ker 46 +
14,02 m x USD 688.000,-

¿Quieres vender un barco?

¿Tienes un barco de ocasión? ¡Anúncialo y véndelo ahora!

Vender un barco de vela
Baltic 56
Baltic 56
Baltic 56 Baltic 56 Baltic 56 Baltic 56 Baltic 56 Baltic 56 Baltic 56 Baltic 56 Baltic 56
desplazarse a través de todas las fotos



Permalink / Nr. de anuncio:

Número de visitas últimos 7 días: 43

Comentarios de clientes satisfechos
Feedbacks“Buen sitio web, buenas funciones de búsqueda, buena usabilidad en general. Seguro utilizaré de nuevo.”
Posibilidades de pago
Visa MasterCard American Express PayPal

Visa, MasterCard, American Express o PayPal

Sistema de protección
No Spam

Nuestro sistema de seguridad te protege contra emails publicitarios, spam e intentos de estafa.

© 2020